The rivet nut is widely used in the fastening field, and is mainly used in the assembly of electromechanical and light industrial products such as aviation, furniture, automobiles, instruments, machines, and decoration. Of course, it is more common with rivet nuts, and it is often difficult to distinguish.

First of all, in terms of appearance, you can look at the difference in appearance.
In terms of appearance, the difference between the rivet nut and the rivet nut is still very large, but their main function is almost the same. Both are provided for the thin plate to be threaded, but the way it is installed is different. The way the installation is done greatly determines the purpose and use of a nut.
First of all, the way to install the rivet nut is to use the rivet gun for riveting, so it is suitable for operation where the square tube is not easy to press. The rivet nut also makes up for some of the shortcomings of electric welding, such as aesthetics, and places where it is not easy to weld the machine, such as thin plates. The rivet nut is mostly used in some cabinet cabinets, square tube round tubes, fan production, equipment production, and zinc steel guardrails.
Secondly, the rivet nut is also used for threading on the thin plate of the cabinet cabinet. The operation mode is to use the riveting machine for riveting. This requirement will be higher and requires a riveting machine. The rivet nut is flat and does not have a bulge after being riveted to the edge of the sheet. The rivet nut is mainly used in the production of some cabinet cabinets, as well as some equipment production, pumps, automobiles, and other aspects of production.
The most important point is that the rivet nut can be used on the upper side of the finished product and the semi-finished product, and the rivet nut must be used on the edge of the thin plate. The finished product cannot use the rivet nut because it is not suitable for the operation of the riveting machine.