Provides load bearing threads in sheet - for aluminum, cold rolled steel, and other ductile materials.

Quick and easy assembly using standard fixtures:

The installation of the rivet nut is simple, quick and convenient. Just place the rivet nut in the pre-punched or drilled mounting hole, apply a certain installation force, and easily insert the rivet nut into the mounting plate.

High push-out force and twist-out force: The mouth of the rivet nut is closely engaged with the metal plate to ensure that the product has a strong push-out force. At the same time, the perfect combination of product pattern teeth and metal plate ensures that the product achieves high anti-torsion output force.

Non-destructive installation: It is recommended that the shank length of the product is always smaller than the small thickness of the installation plate. Under the condition of applying appropriate installation force, the inner thread of the rivet nut will neither be deformed nor easily damaged.​​

The back is kept flat: the rivet nut completes the installation of the product from the mounting surface of the mounting plate, and the back of the mounting plate is kept flat and smooth. Anti-loosening rivet nut

This type of rivet nut has a unique internal thread design, which can be used in applications with high tightening and anti-loosening performance requirements. Riveting Nuts for Stainless Steel Sheets

Such products are made of specific stainless steel materials, and after heat treatment, the products can obtain the highest hardness of most 300 series stainless steel plates. This feature makes the rivet nuts more suitable for installation in stainless steel sheets.

(1) In order to avoid plate deformation and optimize product performance, when selecting products, the distance from the center of the selected product hole to the edge of the mounting plate should be as close as possible or higher than the standard value.

(2) The diameter of the punching hole corresponding to the mounting hole must be controlled within +.001/.025mm. Punching dies must be kept sharp. The installation direction of the fasteners should be consistent with the punching direction.

Founded in the year 2009, Jiaxing Reegu Hardware Product Co., Ltd. Enjoys the convenient transportation: it's located in haiyan Tongyuan Industrial Park, contiguous to the cross-sea hangzhou bay bridge & just 100 kms far from hangzhou xiaoshan airport.

Our company covers an area of about10000 square meters & employs more than 80 workers. All the time, our company keeps top production technology, advanced production equipments, best design capacity. Under the leading system & concept in quality control, our aluminum rivet nuts company easily passed the iso 9001:2001 quality system certification. In order to engage in the production & development of the rivet nuts, our company pumped an enormous sum of money into buying many sets of automatic molding machines & related equipments from taiwan in theyear 2011. Now via these talents & facilities, our company can totally guarantee the product quality & production efficiency.