Production Process of Riveting Nut

Riveting nut is a kind of self tightening nut, which is widely used because of its various specifications and can adapt to various models.

Production Process of Riveting Nut

The production process of rivet nuts is similar to that of other screws. Only the screws are made by the screw driver, and the nuts are made by the nut driver. Introduce the production process of rivet nuts.

1. First of all, we need to determine the material and material of the rivet nut, so that we can use what material to produce. We can buy screws and wires only when we know what materials and materials to use.

2. Determine the specification and type of rivet nut, and check its size and length. In this way, it is easy to use a large screw wire.

3. After determining the materials, materials, specifications and types, we need to see if they are commonly used rivet nuts. If they are, there must be corresponding molds in the factory. If not, it is non-standard, then we have to order molds.

4. After all production is ready, the rivet nut shape, that is, the appearance, must be made with the nut machine.

5. After the pier is driven out, the machine for tapping the nut teeth shall be used for tapping.

6. After tapping the thread, conduct electroplating treatment. The stainless steel rivet nut does not need electroplating, but only needs to be cleaned. If you want to plate other colors, you must take them to a professional electroplating manufacturer for electroplating treatment.