1. Application method of rivet nut gun

1. Before starting work, inject a small amount of lubricating oil from the air inlet to ensure the working performance and working life of the rivet nut gun.

2. Maintain the specified intake pressure. If the intake pressure is too small, the power of the riveting hammer will be reduced. Not only the riveting power is low, but the rivet head may also crack due to too many hammering times.

3. Use a protective spring to connect the punch with the gun body reliably to prevent the punch from flying out and endangering people or products.

4. The tail of the punch is prepared according to the model of different rivet nut guns, and should not be used in series to avoid harming the parts and reducing the power.

5. Do not shoot empty guns at will during use to avoid damage to the parts.

6. Press the button after the punch is on top of the rivet. Otherwise, the reciprocating motion of the piston will consume a part of the energy, and the piston will hit the casing and damage the rivet nut gun.

7. Hold the handle in the right hand and press the button with the index finger to start the rivet nut gun. You can use the button to adjust the size of the compressed air to ensure the smooth operation of the rivet nut gun. At the beginning of riveting, due to the long rivet rod, the space between the rivet rod and the rivet hole is large, and the rivet rod simply bends when hammered. Therefore, the button should be pressed lightly to make the power of the rivet gun smaller. After the rivet rod is filled with the rivet hole, press again, and the power of the rivet can quickly form the pier head. When the head is close to the end, gradually loosen the button to avoid hitting the pier head too much. Low.

2. Precautions for rivet nut gun:

With the wide application of fasteners such as rivet nuts in various fields, the rivet nut gun, which is the riveting tool for such strong parts, has naturally been widely used. This riveting tool is divided into several types such as pneumatic, manual and electric, among which the manual rivet nut gun is widely used. The following is an expert from a manufacturer specializing in the production of fasteners to introduce the five precautions for the use of rivet nut guns, hoping to assist users of Everbright.

Note 1: In use, it is necessary to always check whether the nozzle screw has the correct equipment and its compatibility, and also check the degree of wear.

Note 2: In order to avoid the weak connection of each connection part during use, we need to check the connection firmness of each connection part frequently.

Note 3: Before using it, you need to check the air inlet and the pipeline for gas transmission (this is mainly for the pneumatic rivet nut gun).

Note 4: Before using, you need to pay attention to a certain amount of pneumatic oil in the gun.

Note 5: If you need to use a pneumatic rivet nut gun to equip a lot of rivet nuts, then we need to add grease to the gun during use to effectively reduce the damage to the gun due to wear. Related products: rivet nuts

Note 6: In the process of using, replace the parts with serious wear and tear, and pay attention to the compatibility of the parts and the gun when replacing the parts.