Jiaxing Reegu Hardware Product Co., Ltd. is China Carbon Steel Riveted Nuts Manufacturers and Custom Carbon Steel Riveted Nuts Suppliers
No.699, Chuangye Road, Tongyuan Industrial Park, Haiyan, Zhejiang Province, China
Experienced employees & experts are Always At Your Service to provide you with satisfactory products & professional instruction on technical problem solutions.
+86-18057366698 Contact UsHexagonal welding nut is also a welding nut with six corners and six faces. It can be said that hexagonal welding nut is selected by people in their life for a long time. It may not be hexagonal welding nut that people used in a long time ago, but later they gradually felt that it is still easy to use hexagonal, so it can be widely used. That is, except for other welding nuts used in some special occasions, hexagon welding nuts are used for fixing and sealing.
In addition, the hexagonal welding nut is also made to be more convenient for use. On the machine, the space of the installation part of some welding nuts is not so empty, and the range of wrench movement is very small. When the hexagonal welding nut is tightened or loosened, it only needs to turn the wrench 60 degrees at a time to slowly tighten or loosen the welding nut. The square welded nut needs to be rotated 90 degrees each time. If the space is limited, the use of the square welded nut is still very difficult.
Some people may wonder why not use the seven square welding nuts and the eight square welding nuts? First of all, there is no 7-square welding nut, because if it is made into a 7-square welding nut, every angle of the welding nut is uneven, and it is more difficult to disassemble. Besides, the octagonal welding nut has eight corners, which means that the area of each side is small. When tightening or disassembling, the contact surface between the wrench and the welding nut is also small, so it is easy to slip.
Then look at the wrench. The handle and the wrench of an ordinary wrench can form an included angle of 30 degrees, so when the place where the welding nut is installed is very narrow, and the wrench can not move freely, while for hexagon welding nut, just pull the wrench on a welding nut, turn the wrench over and pull the welding nut again, so that the welding nut can be tightened by repeatedly pulling back and forth several times.
Jiaxing Reegu Hardware Product Co., Ltd. is China Carbon Steel Riveted Nuts Manufacturers and Custom Carbon Steel Riveted Nuts Suppliers
No.699, Chuangye Road, Tongyuan Industrial Park, Haiyan, Zhejiang Province, China
Copyright © 2021 Jiaxing Ruigu Hardware Technology Co., Ltd. All Rights reserved.