The s(cls) series of rivet nuts provide a simple method for installing internal threads to clean metal sheet products, and play a reliable fixing role. When it is necessary to insert the nut into the hole of the metal plate, the inlaying and strengthening function is completed by pressure.

Features of pressure riveting nut:

1. The reverse side of the sheet should be completely embedded;
2. Small and delicate, suitable for all electronic or fine equipment;

3. High torque resistance;

4. Equipped with a lunch box, just simple riveting;

5. Serialization of specifications to meet various design requirements

Application Technical Guide:

1. The S series rivet nuts are made of free-cutting iron, which is treated after heat treatment. The CLS series stainless steel rivet nuts are made of easy-to-use free-cutting stainless steel, and the appearance is not treated.

2. The hardness of low carbon steel plate must be less than 70RB, and the hardness of stainless steel plate must be less than 80RB.
3. It is suitable for plates of various thicknesses, with a minimum thickness of 0.8mm. When using, it is necessary to determine the tail number Z corresponding to size A according to the thickness of the plate and the specification of the nut. The user selects samples and orders according to the tail number in the table according to the thickness of the plate;

4. According to the size of the hole diameter, it should be accurately controlled, and it should be processed according to the tolerance size of 0-+0.075mm, preferably punching, and the nut should generally be installed from the "break" surface of the plate. The installation process is usually completed through the "press riveting" operation, and it must not be impacted and knocked in.

Application scope of pressure riveting nut: applicable industries include electronics, electrical appliances, toys, clocks and watches, furniture, lighting, computer cases, cabinets, collective boxes, sheet metal, home appliances, communication equipment, etc. The main products are SOUTHCO and PEM standard fasteners And non-standard hardware miscellaneous pieces.

Model: S CLS SP SS CLSS SPMS
Purpose: Press rivet nut, solid internal thread, for thin sheets, thicknesses as thin as 0.03" (0.8mm), thread sizes #2 to 1/2" and M2 to M10.
Material: iron-plated green blue-white zinc (12L15) stainless steel (303 material) stainless iron (416 material)

Specifications: M2/M2.5/M3/M4/M5/M6/M8/M10/M12-0/1/2

Surface treatment: free cutting steel/quenching/surface hardness HRC30-33/coating: blue and white zinc; also stainless steel stainless iron and aluminum, copper.