The production process of pressure riveting nuts is roughly the same as that of other screws, except that the screws are punched out with a screw machine pier, and the nuts are punched out with a nut machine pier.

1. Acquisition of data

First of all, we need to understand what materials and raw materials the rivet nuts are, so that we can use what materials to produce and what raw materials are used to produce them, and then prepare to purchase the production materials of the rivet nuts.

2. Standard confirmation

Confirm the standard and type of the rivet nut to see its size and length. This is the best way to use a large screw wire.

3. Selection of molds

After the first two steps are done, we need to see if it is a commonly used rivet nut. If it is, there must be a corresponding mold in the factory. If not, it is non-standard, then we have to order molds.

4. The composition of the appearance

After everything is ready for production, the shape of the rivet nut, that is, the appearance, must be punched out with a nut machine.

5. Processing of tapping teeth

After the pier is punched out, use the machine for tapping and nut teeth to tap it.

6. Treatment of electroplating

After the thread is tapped, electroplating is performed, and the stainless steel rivet nut does not need electroplating, it only needs to be cleaned. If you want to electroplate other colorful, you have to get a professional electroplating manufacturer for electroplating.