Fastener rivet nuts and Carbon steel rivet nut are widely used in metal sheets and equipment shells. The pressure riveting nut is generally carried out by the pressure riveting nut machine, and the riveting nut gun is generally used with a manual riveting nut gun or a pneumatic riveting nut gun. Besides, what are the differences between the two?

First, the difference in the basic working principle.

Pressure riveting nut: The pre-set holes of the sheet metal are pressed into the sheet metal by means of the embossing teeth. Generally speaking, the diameter of the square preset holes is slightly smaller than the embossing teeth of the pressure riveting nut. The inside causes the surrounding of the hole to form plastic deformation, and the deformed object is squeezed into the guide groove, thereby forming the function of locking.

Riveting nut: After installing it on the metal plate, open the riveting interface to make it stable on the plate.

Second, the type standards are different.

The type standard of pressure riveting nut is divided into: S pressure riveting nut, CLS pressure riveting nut, SP pressure riveting nut. Type standard of rivet nuts: round rivet nuts, hexagonal rivet nuts, etc.

Third, the compressive strength is different.

The compressive strength of the rivet nut is stronger than that of the rivet nut.

Fourth, the anti-rotation properties are different.

The anti-rotation performance of the pressure riveting nut is better; the avoidance and rotation of the riveting nut are poor.

Fifth, the application scale is different.

The pressure riveting nut is more inclined to be used in precision and precision equipment than the riveting nut.

The above is the difference between the rivet nut and the rivet nut in five aspects: working principle, type standard, compressive strength, anti-rotation and application fields. After reading it, is it possible to understand the difference between the two more deeply?