The rivet nut is a kind of special nut for thin plates commonly used on thin plates. Because it is precisely for the thin plate that cannot be tapped and cannot be installed

The specifications of rivet nut tools are M3 M4 M5 M6 M8 M10 M12. The use of riveting nuts: If the nut of a product needs to be installed outside, and the space inside is small, the indenter of the sub-riveting machine cannot be entered for riveting and the methods such as budding cannot meet the strength requirements. Pull riveting must be used when riveting is not feasible.

The application field of rivet nuts is basically the same whether it is flat head, small head, half hexagon and full hexagon. floral. The use of riveting nuts: If the nut of a product needs to be installed outside, and the space inside is small, the indenter of the sub-riveting machine cannot be entered for riveting and the methods such as budding cannot meet the strength requirements. Riveting is not possible. Riveting must be used. It is suitable for fastening of plates and pipes of various thicknesses (0.5MM-6MM). Using a pneumatic or manual riveting gun, it can be riveted at one time, which is convenient and firm; it can replace the traditional welding nut and make up for the shortcomings of thin metal plates, thin tubes, and welding nuts that are not smooth.

The difference between the small head half hexagon rivet nut and the flat head nut is on the nut cap. The flat head has a wide side, and the small head half hexagon has no wide side. The places of use are different. For example, the flat head is like a ceiling type. Small hexagons are embedded.

The flat head rivet nut head is a round cake-shaped head, which is installed and matched with the workpiece. The head will form a round cake-shaped protrusion on the workpiece, which affects the cooperation and appearance of the workpiece. The shape of the countersunk head can be completely sunk into the prefabricated sink of the workpiece. After assembly, the small head rivet nut will not form any protrusions on the workpiece. Using the workpiece to keep the surface flat can make the installation workpiece and other workpieces closer. Fit and beautiful.