The S series rivet nuts are made of free-cutting iron, which is treated after heat treatment. The CLS series of rivet nuts are made of easy-to-use free-cutting stainless steel, and the appearance is not treated.

The hardness of low Carbon steel rivet nut must be less than 70RB, and the hardness of stainless steel plate must be less than 80RB.

It is suitable for plates of various thicknesses, with a thickness of 0.8mm. When using, the tail number Z corresponding to the A scale can be determined according to the thickness of the plate and the specification of the nut. The user selects samples and orders according to the tail number in the table according to the thickness of the plate;

According to the size of the aperture, it should be controlled and processed according to the tolerance size of 0-+0.075mm. For punching, the nut should generally be installed from the "break" surface of the plate. The installation process is generally completed through the "press riveting" operation, and it must not be impacted and knocked in.

The installation of the pressure riveting nut is exquisite. If the installation method is not correct, the riveting will not be firm after the pressure riveting. For example, one of our customers reported that the nut would fall off after riveting and pressing. After our technicians arrived at the site, we found that many customers hit it with a hammer or other impact methods. Because the pressure riveting nut is installed in this way, it will cause pressure. The uneven force of the rivet nut seriously affects the pressure riveting effect.

It looks like it is pressed in, but in fact, the flower teeth of the rivet nut are not riveted with the plate at all, so it is definitely not riveted. The installation of the rivet nut must use special installation equipment, or simply use a press and stamping equipment. The rivet nut has an internal thread portion, a tubular portion that continues from the internal thread portion, and a flange at the end of the tubular portion. In the state where the rivet nut penetrates the hole of the device to be installed, the tubular portion is buckled by a connecting tool to The diameter of the tubular portion is expanded, and the member to be mounted is sandwiched between the buckled tubular portion and the flange, whereby the rivet nut is fixed to the member to be mounted. By connecting the external thread of the bolt to the internal thread portion of the rivet nut, other components to be mounted can be mounted. The rivet nut can be operated from one side of the component to be installed, so it is very convenient to connect the nut to the component that cannot be operated from the back side, such as a panel and other components to be installed.